Key Specs
The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
*914 Aggregate Handler only.
Displaying 1-6 of 10
| Operating Weight | 19103 lb 8668 kg |
| Bucket Capacities | 1.3-3.5 m3 (1.7-4.6 yd3) 1.3-3.5 m3 (1.7-4.6 yd3) |
| Bucket Capacities - General Purpose | 1.3-1.9 m³ (1.7-2.5 yd³) 1.3-1.9 m³ (1.7-2.5 yd³) |
| Bucket Capacities - Light Material | 2.5-3.5 m³ (3.3-4.6 yd³) 2.5-3.5 m³ (3.3-4.6 yd³) |
| Maximum Gross Power | 110 hp 82 kW |
| Rated Net Power - Rated Engine Speed | 2200 r/min 2200 r/min |
| Maximum Gross Power - Rated Engine Speed | 1800 r/min 1800 r/min |
| Rated Net Power - SAE J1349 | 99 hp 74 kW |
| Maximum Gross Power - ISO 14396 (metric) | 112 hp 112 hp |
| Rated Net Power - ISO 9249 | 98 hp 73 kW |
| Maximum Gross Torque - SAE J1995 | 335 ft·lbf 454 N·m |
| Maximum Gross Torque - ISO 14396 | 332 ft·lbf 450 N·m |
| Maximum Net Torque - SAE J1349 | 329 ft·lbf 446 N·m |
| Maximum Net Torque - ISO 9249 | 327 ft·lbf 443 N·m |
| Displacement | 220 in³ 3.6 l |
| Bore | 3.85 in 98 mm |
| Stroke | 4.72 in 120 mm |
| Engine Model | Cat C3.6 Cat C3.6 |
| Emissions | Engine meets Tier 4 Final/Stage V emission standards. Engine meets Tier 4 Final/Stage V emission standards. |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Maximum Gross Power - ISO 14396 | 110 hp 82 kW |
| Recyclability | 95% 95% |
| ROPS | ISO 3471:2008 ISO 3471:2008 |
| FOPS | ISO 3449:2005 ISO 3449:2005 |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. *The measurements were conducted with the cab doors and windows closed. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Cooling System | 5.7 gal (US) 21.5 l |
| Fuel Tank | 43.6 gal (US) 165 l |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Axles - Rear Center Differential | 2 gal (US) 7.5 l |
| Hydraulic System - Including Tank | 25.9 gal (US) 98 l |
| Diesel Exhaust Fluid (DEF) Tank | 4.8 gal (US) 18 l |
| Engine Crankcase | 2.6 gal (US) 10 l |
| Hydraulic Tank | 14.5 gal (US) 55 l |
| Transmission | 0.8 gal (US) 3.2 l |
| Axles - Front Center Differential | 2 gal (US) 7.5 l |
| Maximum Flow - Steering Pump | 22 gpm 82 L/min |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.75 turns 3.75 turns |
| Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | 2.8 s 2.8 s |
| Maximum Working Pressure - Steering Pump | 3263 psi 22500 kPa |
| Steering Articulation Angle - Each Direction | 40 ° 40 ° |
| Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | 3046 psi 21000 kPa |
| Maximum Flow - Implement Pump | 39 gpm 148 L/min |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | 24 gpm 90 L/min |
| Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure | 3046 psi 21000 kPa |
| Hydraulic Cycle Time - Total Cycle Time | 12.5 s 12.5 s |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.2 s 5.2 s |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow | 24 gpm 90 L/min |
| Hydraulic Cycle Time - Dump, at Maximum Reach | 1.4 s 1.4 s |
| Relief Pressure - Tilt Cylinder | 4931 psi 34000 kPa |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | 32 gpm 120 L/min |
| Maximum Working Pressure - Implement Pump | 4061 psi 28000 kPa |
| Hydraulic Cycle Time - Rackback | 2.2 s 2.2 s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 3.7 s 3.7 s |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
| Forward and Reverse - Speed Range 3 | 25 mile/h 40 km/h |
| Forward and Reverse - Speed Range 1* | 6.3 mile/h 10 km/h |
| Forward and Reverse - Speed Range 2* | 12.5 mile/h 20 km/h |
| Other Choices Include | 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details. |
| Standard Size | 17.5 R25 L2 XTLA 17.5 R25 L2 XTLA |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Rear | Oscillating ±11 degrees; Locking differential (Standard) Oscillating ±11 degrees; Locking differential (Standard) |
| Front | Fixed; Locking differential (standard) Fixed; Locking differential (standard) |
Use the comparison tool to compare detailed specs of Cat and competitor models.
Compare All ModelsStudio Shot
Cat® 914 Small Wheel Loader
Cat® 914 Small Wheel Loader
Cat® 914 Small Wheel Loader
Cat® 914 Small Wheel Loader
Cat® 914 Small Wheel Loader
Front View
Top View
Left View
Rear View
Bottom View
Right View
The New Cat® Wheel Loaders are Here For You
Cat® 910, 914, 920 Compact Wheel Loaders at Work
Cat® 910, 914, 920 Compact Wheel Loaders Overview
Cat® 910, 914, 920 Compact Wheel Loaders Features and Benefits
Cat® 914 and 920 Aggregate Handlers Features and Benefits
Cat® 914 and 920 Waste Handlers Features and Benefits
Cat® 914 and 920 Waste Handlers Overview
Cat® 914 Customer Story - Glenwood Springs, CO
Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.
VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.
VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.
North America – English