Electric Power: Genset Fuel Tanks C18 Integral Fuel Tank Base

Name: C18 Integral Fuel Tank Base
Brand: Caterpillar

Request A Price Find Dealer

C18 Integral Fuel Tank Base
Change model

Overview

This is a tank that is embedded within the baseframe.

Displaying 1-6 of 4

Tank design provides capacity for thermal expansion of fuel
Integral diesel fuel tank is incorporated into the generator set base frame
Direct reading fuel level gauge
Fuel supply dip tubes positioned so as not to pick up fuel sediment
Fuel return and supply dip tubes are separated by an internal baffle to prevent recirculation of heated return fuel
Fuel fill – 76.2 mm (3 in), lockable flip top cap
Tanks are leak tested at 31kPa (4.5psi) minimum
Heavy gauge steel gussets suitable for lifting package
Polyester powder coating – Gloss black textured finish
Primary tanks are equipped with customer connections for remote fuel transfer, return and vent
Sloped top tank plate to front to contain accidental coolant, oil and fuel spillages
Sloped bottom tank plate to middle for fuel drainage
Rear stub-up access

Single wall design
Heavy construction 6 mm (0.24 in) steel plate side channels and 4 mm (0.16 in) sheet steel tank design
Standard offering for open and enclosed (High Ambient and Sound Attenuated) generator sets

Secondary containment – Open top design
Welded steel basin designed to contain a minimum of 110% of primary tank capacity (total fluid containment)
Heavy construction 6 mm (0.24 in) steel plate side channels and 4 mm (0.16 in) sheet steel tank design
Option for enclosed (High Ambient and Sound Attenuated) generator sets

Tank design provides capacity for thermal expansion of fuel
Integral diesel fuel tank is incorporated into the generator set base frame
Direct reading fuel level gauge
Fuel supply dip tubes positioned so as not to pick up fuel sediment
Fuel return and supply dip tubes are separated by an internal baffle to prevent recirculation of heated return fuel
Fuel fill – 76.2 mm (3 in), lockable flip top cap
Tanks are leak tested at 31kPa (4.5psi) minimum
Heavy gauge steel gussets suitable for lifting package
Polyester powder coating – Gloss black textured finish
Primary tanks are equipped with customer connections for remote fuel transfer, return and vent
Sloped top tank plate to front to contain accidental coolant, oil and fuel spillages
Sloped bottom tank plate to middle for fuel drainage
Rear stub-up access

Single wall design
Heavy construction 6 mm (0.24 in) steel plate side channels and 4 mm (0.16 in) sheet steel tank design
Standard offering for open and enclosed (High Ambient and Sound Attenuated) generator sets

Secondary containment – Open top design
Welded steel basin designed to contain a minimum of 110% of primary tank capacity (total fluid containment)
Heavy construction 6 mm (0.24 in) steel plate side channels and 4 mm (0.16 in) sheet steel tank design
Option for enclosed (High Ambient and Sound Attenuated) generator sets