Tools H95 Cone

Product Specifications for H95 Cone

H95 Cone Standard Equipment

Air Inlet System

• Air Cleaner; single element canister type

Control System

• EMCP 4.2B

• Emergency stop pushbutton

• 24 Volt DC operation

• Environmental sealed front face

• Text alarm / event descriptions

• Generator mounted - rear facing

• Generator set packages include:

• Caterpillar' s Voltage Regulato

• IVR includes reactive droop capability

• 3 Phase voltage sensing

• KVAR / PF modes

• RFI suppression

• RFI suppression

• Min / max exciter

• Limiter and exciter diode monitor

• Controls:

• Speed adjust

• Auto / start / stop control

• Engine cool

• Engine cycle crank

• Alarm acknowledge

• Lamp test

• Load histogram feature

• PLC functionality

• Customizable screens

• 0 True RMS AC metering

• 3 Phase

• +/- 2% accuracy

• Digital indication for:

• RPM

• DC volts

• Operating hours

• Oil pressure (psi, kPa or bar)

• Coolant temperature

• Volts (L-L & L-N)

• Frequency (Hz)

• Amps (per phase & average)

• Power Factor (per phase & average

• kW (per phase, average & percent)

• kVA (per phase, average & percent

• kVAr (per phase, average & percent)

• kW-hr (total)

• kVAr-hr (total)

• Warning/shutdown with common LED indication of shutdowns for: Low oil pressure - High coolant temperature - Overspeed - Emergency stop - Failure to start (overcrank) - Low coolant temperature - Low coolant level -

• Low oil pressure

• High coolant temperature

• Overspeed

• Emergency stop

• Failure to start (overcrank)

• Low coolant temperature

• Low coolant leve

• Programmable protective relaying functions:

• Generator phase sequence

• Over / under voltage (27/59)

• Over / under frequency (81 o/u)

• Reverse power (kW) (32)

• Reverse reactive power (kVAr) (32RV)

• Overcurrent (50/51)

• Communications:

• Accessory module data link

• Serial annunciator module data link

• Cat Connect

• 3 Analog inputs

• 6 Customer programmable digital inputs

• Number of I/O varies on options selected:

• 4 programmable relay outputs (Form A)

• 1 Programmable relay outputs (Form C)

• 1 Programmable digital outputs

Cooling System

• Certified standard PGS provided

• ATAAC - 3516E Package radiators shipped installed

Exhaust System

• Dry exhaust manifold

• Flanged faced outlet(s)

Fuel System

• Secondary fuel filters

• Fuel cooler; not included with packages without radiator

• Flexible fuel lines - shipped loose

• Secondary fuel filter

General

• Caterpillar yellow with high gloss black rails and radiator

• Right hand servicing

• Flywheel and flywheel housing - SAE No. 00

• SAE Standard rotation

Generator and Attachments

• 3 Phase brushless, salient pole

• 6 lead

• Low Voltage: Random wound - Internal Excitation - Winding temperature detectors - NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby) - Busbar connections, top center mounted, top cable entry - NEMA standard hole pattern

• Medium Voltage:

• Form wound

• Permanent magnet

• Winding temperature detectors

• NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby)

• Bus bar connections, right side extension box, bottom cable entry

• NEMA standard hole pattern

• High Voltage:

• Form wound

• Permanent magnet

• Winding temperature detectors

• Anti condensation space heater

• Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

Governing System

• ADEM A3

Literature

• English

Lubrication System

• Lubricating oil

• Gear type lube oil pump

• Integral lube oil cool

• Oil filter, filler and dipstick

• Oil drain lines and valve

• Fumes disposal

Mounting System

• Rails - engine / generator / radiator mounting

• Anti-vibration mounts (shipped loose)

• Rubber anti-vibration mounts (shipped loose)

Starting System

• 24 Volt electric starting motor

• 45 Amp charging alternator

• Battery and battery rack w/cables

• Battery disconnect switch

H95 Cone Optional Equipment

Control System

• EMCP 4.3, EMCP 4.4

Air Inlet System

• Single element filter

• Dual element air cleaner

Cooling System

• Standard ambient radiators

• Standard ambient ATAAC radiators

• Optional installed radiators

• Optional installed ATAAC radiators

• Water level switch gauges

• Coolant

Crankcase System

• No explosion relief valves

• Explosion relief valves

• Ventilation system

Exhaust System

• Elbows

• Flange and exhaust expanders

• Flanges

• Flexible fittings

• Y-Adapters

• Mufflers

• Exhaust offset

• Tier 4 clean emissions module

• Tier 4 dosing cabinet

• Tier 4 clean emission MOD Kits

• Clean emission parts

Fuel System

• Primary Fuel Filter

• Fuel Priming Pumps (Tier 4) - Manual or electric

General

• US aid emblem

• Special paint (Colors other than Caterpillar yellow or high performance paints)

Generators and Attachments

• Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

• Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames

• Space heater

• Generator conversion

• Thermostate for space heater

• Alternator air cleaner

• Differential current transformers (DCT)

• Differential current transformers (DCT) 8.7 kV and 15 kV classes

Instrumentation

• Pyrometer and thermocouples

Lubrication System

• Lube oil in standard sump

• Oil level regulator

• Prelube pumps

Mounting System

• Puck style low efficiency isolators

• Spring type vibration isolators

• IBC vibration isolators

Power Connections

• Ground cables between generator and terminal box

• Neutral ground connections

• Center post busbar

• Right side power connections

• Left side power connections

• Rear power connections

• 2700 Frame, four lead, four terminal

• Low voltage circuit breakers

Special Tests / Reports

• Canadian Standards Association certification

• IBC certification

• OSHPD certification

• PGS test report @ 1.0 power factor

• PGS test report @ 0.8 power factor

• Standard engine test charge

• generator test report

• Fuel consumption test

• Generator set fuel consumption test

• Torsional vibration analysis reports

Starting and Charging

• Engine barring device

• 24 Volt battery set - Dry

• 10, 20, 35 and 50 amp battery chargers

• Electric starting motors

• Air starting motors

• Starter cover

• Air pressure regulator

• Jacket water heaters

Extended Service Coverage

• Platinum, Gold and Silver coverage