Expanding On-Site Power Capacity: Planning Beyond the Genset
From data centers to manufacturing facilities, demand for reliable, scalable power continues to rise faster than ever. In fact, data centers alone are projected to consume more than 1,000 TWh of electricity by 2026, underscoring the pace at which energy demand is accelerating.
As facilities expand, adding generation capacity often introduces a new set of emissions and permitting considerations.
For many facility owners, the challenge is no longer: “How to generate more power?”
It is: “How to grow without hitting emission limits?”
As organizations plan for growth, retrofit existing assets, or prepare for future expansion, aftertreatment is becoming an increasingly important part of long-term power strategy.
Three Key Considerations Before Expanding On-Site Generation Capacity
Facilities rarely reach expansion limits because diesel gensets cannot provide additional power. More often, cumulative emissions reach regulatory thresholds before power capacity does. As additional gensets are added, NOx emissions can increase quickly, potentially placing projects into more restrictive permitting categories.
Despite the emergence of new technologies, diesel gensets remain a preferred solution for many critical applications due to their fast response times, proven reliability, strong load acceptance capabilities, and fuel flexibility.
The challenge is no longer performance; it is managing emissions as sites grow.
Aftertreatment systems are designed to treat exhaust gases after combustion, helping facilities meet increasingly stringent emissions requirements.
- SCR (Selective Catalytic Reduction): Converts NOx into nitrogen and water
- DPF (Diesel Particulate Filter): Removes particulate matter
- DOC (Diesel Oxidation Catalyst): Reduces carbon monoxide and hydrocarbons
Aftertreatment technologies have the ability to reduce NOx emissions by as much as 90–95%, helping facilities:
- Install additional generators
- Support expansion without triggering new compliance barriers
- Preserve flexibility for future growth
Tier 2 diesel gensets equipped with aftertreatment can achieve emissions performance comparable to Tier 4 levels. This can significantly increase the amount of generation capacity that can be installed within a given emissions threshold. See the table given below for details.
For example, under a 50-ton annual NOx limit and 100 operating hours per year, Tier 4 emission levels allow approximately 644 MW of installed capacity, compared to 67 MW for Tier 2 engines without aftertreatment. Therefore, by adding aftertreatment to Tier 2 gensets, an additional 577 MW of capacity can be unlocked within the same emissions constraints.
Site Maximum1 Electrical Capacity (MWe) by: NOx Tons/Year, Engine Technology, and Engine Hours
| Hours/Year | 100 | 500 | 87602 | |||
|---|---|---|---|---|---|---|
| NOx (g/bkW-hr) | 0.67 | 6.4 | 0.67 | 6.4 | .067 | 6.4 |
| Major Source (tons/year) | Tier 4 | Tier 2 | Tier 4 | Tier 2 | Tier 4 | Tier 2 |
| 10 | 129 | 13 | 26 | 3 | 1 | 0 |
| 50 | 644 | 67 | 129 | 13 | 7 | 1 |
| 100 | 800+ | 135 | 257 | 27 | 15 | 2 |
| 250 | 800+ | 337 | 644 | 67 | 37 | 4 |
1. MW electrical installed based on 95% gen efficiency emissions standards. Permits based on actual values may slightly increase installed MW.
2. NOx limitations typically drive permit requirements, but continuous-run engines may need additional toxic or PM controls.
Why Early Aftertreatment Planning Matters?
Many projects assume aftertreatment can be addressed after installation.
While that may be possible in some cases, incorporating it early in the planning process often provides greater flexibility and can help avoid costly redesigns later.
Aftertreatment considerations can influence:
- Space requirements
- Exhaust routing
- Cooling and airflow design
- Acoustics and enclosure design
- Permitting schedules and project timelines
Five Considerations for Evaluating Aftertreatment Solutions
Design for where regulations may be heading, not simply where they stand today.
Run hours, load characteristics, and application requirements can all influence aftertreatment performance and genset solution selection.
Aftertreatment systems can affect equipment footprint, exhaust configuration, cooling requirements, and acoustic design.
Solutions should support future expansion plans without requiring significant redesign or reconfiguration.Solutions should support future expansion plans without requiring significant redesign or reconfiguration.
Emissions control technologies deliver the greatest value when they support uptime, simplify operation, and remain manageable throughout the life of the equipment.
Planning for Growth Starts with Planning for Emissions
Diesel gensets will continue to play a critical role in supporting reliable power. What is changing is the importance of incorporating emissions considerations into long-term capacity planning.
Aftertreatment can help facilities:
- Navigate evolving regulatory requirements
- Preserve flexibility for future expansion
- Support long-term infrastructure strategies
- Reduce the risk of project delays and redesigns
Whether planning a new installation, expanding an existing site, or evaluating future capacity needs, understanding the role of aftertreatment is becoming an increasingly important part of power system design.
By incorporating emissions planning into broader infrastructure strategies, facility owners can better position themselves to meet both performance objectives and regulatory requirements as their operations grow.
For more information about aftertreatment technologies and emissions planning strategies, explore the Cat® aftertreatment solutions page and consult with your Cat dealer.
Paul Cook
Senior Product Consultant, Large Power Systems Division, Caterpillar
Paul Cook is a Senior Product Consultant in the Large Power Systems Division within Power & Energy of Caterpillar. With extensive experience in the aftertreatment space, Paul works closely with our dealers and customers in the application of these products to meet their specific project needs.
Related Blogs
-
Moving Forward on Energy: Why C&I Leaders Should Act Now
Regulatory uncertainty doesn’t have to delay energy decisions. With the right strategy, commercial and industrial (C&I) organizations can strengthen energy resilience today while maintaining flexibility for the future.
Learn More -
One Decision Can Transform “Standby” Into “Strategy”
The generator rating you choose now determines whether your back up power solution simply provides emergency insurance — or becomes a strategic asset in an uncertain energy landscape.
Learn More -
Grid 2035: One Vision for a Stronger System
Grid resilience is being redefined by rising demand, extreme weather, and system complexity. Connect with one of the Cat experts to learn more.
Learn More -
Technical Pitfalls after Genset Commissioning: How Small Changes Impact Reliability
A genset that passes commissioning checks all the boxes. It starts cleanly, runs at full load and meets performance expectations. At that point, it’s tempting to think installation is complete. In reality, installation is only validated at that moment in time. Issues can surface later when a space is reconfigured, parts are added or operating parameters evolve. Many of these modifications seem minor. They don’t feel like they should affect how a genset operates. But every system is interconnected, and when conditions around a genset change, it can erode reliable power.
Learn More