C13B

Industrial Diesel Engines C13B

Request A Price Find Dealer

Key Specs

Maximum Power
577 hp
430 kW
Maximum Torque
1943 lb-ft @ 1400 rpm
2634 Nm @ 1400 rpm
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV

Overview

The Cat?� C13B engine supplies remarkable power and torque in a smaller, lighter engine package. With a aftertreatment that is 65% smaller and 54% lighter than its current equivalent and over 34 kW/L of power density, the C13B is designed to allow OEMs to downsize their engine platforms, lower installation costs and maximize uptime by providing long life in the toughest applications.

Benefits

Peak Power Increased Up To 20% Compared to Previous Models

Over 120 MILLION hours of customer application experience

Engine package is 32% lighter, compared to previous models

Features At A Glance

Displaying 1-6 of 6

Installation

Installation

With a 65% reduction in size and 63% in weight from its previous engine equivalent, the Cat C13B is unparalled in supporting engine downsizing without an impact to overall performance. And with an absence of an EGR, the C13B provides a simplfied installation process, saving OEMs valauble time and costs.
Advanced Features

Advanced Features

Offering peak performance across a wide range of speed, the Cat C13B is optimized to perform at its best no matter what surprises the job site brings. And with 20% more power and 19% more torque than its predecessor engine, the C13 has never been more ready to take on the tough challenges operators meet of every day.
Ideal Applications

Ideal Applications

Industrial, agricultural and construction applications such as: Compressors • Trenchers • Chippers • Grinders • Irrigation equipment • Bore rigs • Drill rigs • Pumps • Hydraulic power units
Total Cost of Ownership

Total Cost of Ownership

The Cat C13B utilizes several technologies to deliver the lowest possible fluid consumption, including an overall fuel savings of 6% when compared to the C13 engine. And thanks to Caterpillar-patented technology the EGR has been eliminated, oil intervals are rated at 500 hours and 5,000 hours for ash services, helping OEMs and operators save on parts and service costs over the lifetime of the engine.
Cat Dealer Product Support

Cat Dealer Product Support

No matter where in the world the Cat C13B is, it’s backed by the reliable and extensive support the Cat dealer network offers across 192 countries. And for even more peace of mind, your Cat engine comes under warranty. See your Cat dealer for details.
Safety

Safety

At Caterpillar, safety is a prioirty. It's why we put all our engines through rigorous rounds of testing and validation—including more than 120 mililon off-highway hours for the Cat C13B. We make our engines reliable, so operators can focus on keeping their work site safe, secure and in service.
Specifications Standard Equipment

Product Specifications for C13B

Download Print
Maximum Power 577 hp 430 kW
Maximum Torque 1943 lb-ft @ 1400 rpm 2634 Nm @ 1400 rpm
Rated Speed 1800-2100 rpm 1800-2100 rpm
Minimum Power 456 hp 340 kW
Emissions EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Engine Configuration In-Line 6 In-Line 6
Bore 5.1 in 130 mm
Stroke 6.2 in 157 mm
Displacement 762.8 in³ 12.5 l
Compression Ratio 15.8:1 15.8:1
Aspiration Turbocharged-Aftercooled (TA) Turbocharged-Aftercooled (TA)
Combustion System Direct Injection Direct Injection
Rotation from Flywheel End Counterclockwise Counterclockwise
Aftertreatment DOC+DPF+SCR DOC+DPF+SCR
Length 50 in 1274 mm
Width 39 in 994 mm
Height 45 in 1134 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 2480 lb 1125 kg
Length 35.3 in 896 mm
Width 31.8 in 807 mm
Height 18.1 in 460 mm
Weight 220 lb 100 kg

C13B Standard Equipment

Print

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled
  • Front or rear exhaust configurations available

Control System

  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated Electronic Control Unit (ECU)
  • Remote fan control

Cooling System

  • Vertical or RH thermostat outlet
  • Centrifugal water pump
  • Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

  • Available SAE No. 1 power take-off with optional SAE B or SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments.

Fuel System

  • Mechanical Electronic Unit Injector fuel system (MEUI-C)
  • Primary fuel filter
  • Secondary and tertiary fuel filters
  • Fuel transfer pump
  • Electronic fuel priming

Lube System

  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Oil dipstick
  • Gear driven oil pump
  • Choice of front, rear or center sumps
  • Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)

Power Take Off (PTO)

  • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

  • Caterpillar yellow paint, with optional colors available at request
  • Vibration damper
  • Lifiting eyes

See how C13B compares against frequently compared products.

Industrial
Selected
C13B
C13B
Maximum Power
577 hp
430 kW
Maximum Torque
1943 lb-ft @ 1400 rpm
2634 Nm @ 1400 rpm
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Industrial
C9.3B
C9.3B
Maximum Power
456 hp
340 kW
Maximum Torque
1540 lb-ft @ 1400 rpm
2088 Nm @ 1400 rpm
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
View Details
Industrial
C13D C13D
C13D
Maximum Power
690 hp
515 kW
Maximum Torque
2360 lb-ft @ 1300 rpm
3200 Nm @ 1300 rpm
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
View Details

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Tools And Expert Help At Every Turn

Find Dealer
Payment Calculator
Current Offers
Rental Options
Used Options

Product Brochures and More Are Ready to Download!

Media Gallery

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated

C13B Tier 4 Diesel Engines - Highly Regulated
C13B Tier 4 Diesel Engines - Highly Regulated
C13B Tier 4 Diesel Engines - Highly Regulated
C13B Tier 4 Diesel Engines - Highly Regulated
C13B Tier 4 Diesel Engines - Highly Regulated

Cat® C13B Industrial Engine

Cat® C13B Industrial Engine

360 View